barrels parts

Wine & Beer Making Equipment

Cornelius Keg - Parts

1948 more...	Cornelius Connector (Gas 'IN') 1/4 barb Gas IN connector to 1/4 inch barbed hose tail only.	£7.04 Qty
Tags: 1/4Corny KegCornyCorneliusKegging & Dispensing

4832 more...	Cornelius Connector (Liquid OUT) 1/4 barb Liquid OUT connector to 1/4 inch barbed hose tail only.	£7.04 Qty
Tags: 1/4Corny KegCornyCorneliusKegging & Dispensing

7900 more...	Cornelius Connector John Guest (Gas 'IN') Cornelius keg connector with a 3/8 inch John Guest fitting that can be used with 3/8 beer or gas line.	£9.64 Qty
Tags: Corny KegCornyCorneliusJohn Guest SpeedfitKegging & Dispensing

7738 more...	Cornelius Connector John Guest (Liquid OUT) Cornelius keg connector with a 3/8 inch John Guest fitting that can be used with 3/8 beer or gas line.	£9.64 Qty
Tags: Corny KegCornyCorneliusJohn Guest SpeedfitKegging & Dispensing

8438 more...	Cornelius Connector (Gas 'IN')	£7.46 Qty
Tags: Corny KegCornyCorneliusJohn Guest SpeedfitKegging & Dispensing
Used with Charger uses 16g gas bulb 3/8 - 1/4 Female Adaptor Flare 1/4 inch hose tail for Cornelius Connector

5266 more...	Cornelius Connector (Liquid OUT)	£7.46 Qty
Tags: Corny KegCornyCorneliusJohn Guest SpeedfitKegging & Dispensing
Used with 3/8 - 1/4 Female Adaptor Flare 1/4 inch hose tail for Cornelius Connector

4298 more...	Cornelius 1/4 inch hose tail for Cornelius Connector	£2.57 Qty
Tags: 1/4Corny KegCornyCorneliusKegging & Dispensing
Fits Connector (Liquid OUT) Connector (Gas 'IN')

3396 more...	Cornelius Complete Lid Assembly Lid for the 19 litre Cornelius kegs which are slightly smaller than the 23 litre type (6935) Capacity: 19 litre	£15.00 Qty
Tags: Corny KegCornyCorneliusKegging & Dispensing
Part of Keg Keg (fully reconditioned) Includes 'O' Ring for Lid

8407 more...	Cornelius 'O' Ring for Lid Capacity: 19 litre	£3.09 Qty
Tags: Corny KegCornyCorneliusKegging & Dispensing
Part of Complete Lid Assembly

7706 more...	Cornelius 'O' Ring for Posts	£0.49 Qty
Tags: Corny KegCornyCorneliusKegging & Dispensing

7540 more...	Cornelius Post for 23 litre keg - gas IN	£6.52 Qty
Tags: Corny KegCornyCorneliusKegging & Dispensing

3293 more...	Cornelius Post for 23 litre keg - liquid out	£6.52 Qty
Tags: Corny KegCornyCorneliusKegging & Dispensing

1137 more...	Cornelius 'O' Ring for Dip Tube	£0.49 Qty
Tags: Corny KegCornyCorneliusKegging & Dispensing

Cornelius Keg - Xtras

3856 more...	Keg King Adjustable Pressure Release Valve with Gauge Connects onto the 'Gas IN post' and displays how much pressure is inside the keg on the gauge (0 - 30 psi). Has adjustment knob to vary maximum pressure. Once maximum pressure is reached the release valve vents excess gas and holds keg at the set pressure.	£16.95 Qty
Tags: Kegging & Dispensing

2722 more...	Cornelius Adjustable Pressure Release Valve with Gauge Connects onto the 'Gas IN post' and displays how much pressure is inside the keg on the gauge (0 - 15 psi). Has adjustment knob to vary maximum pressure. Once maximum pressure is reached the release valve vents excess gas and holds keg at the set pressure.	£23.45 Qty
Tags: Corny KegCornyCorneliusKegging & Dispensing
Fits Keg Keg with S30 Valve Keg Keg (fully reconditioned)

5083 more...	Cornelius Flexy Tap Fits Cornelius Keg 'liquid out post', ideal for serving beer straight to the glass. (connector included)	£12.99 Qty
Tags: Corny KegCornyCorneliusKegging & Dispensing
Fits Keg Keg Keg with S30 Valve Keg (fully reconditioned)

General Spares - Caps

4518 more...	Barrel Spares 4 ins Cap with Pin valve This type of cap is used with a pin valve and includes an 'O' ring.	£15.32 Qty
Tags: King KegPin ValveKegging & DispensingSpares
Part of Bottom Tap with pin valve Top Tap with pin valve Barrel with pin valve Includes Pin Valve 4 ins Drilled Cap (no valve) 'O' Ring

9739 more...	Barrel Spares 4 ins Cap with S30 valve This type of cap is used with CO2 gas cylinders and includes an 'O' ring.	£19.87 Qty
Tags: King KegS30 ValveKegging & DispensingSpares
Part of Top Tap with S30 valve Bottom Tap with S30 valve Barrel with S30 valve Includes 4 ins Drilled Cap (no valve) 'O' Ring S30 Valve

9882 more...	Barrel Spares 4 ins Drilled Cap (no valve) This type of cap is drilled to receive a Pin Valve or an S30 Inlet Valve (not included). Requires an 'O' ring (not included).	£4.40 Qty
Tags: King KegPin ValveS30 ValveKegging & DispensingSpares
Part of 4 ins Cap with S30 valve 4 ins Cap with Pin valve

2116 more...	Barrel Spares 'O' Ring Washer that fits 4 ins barrel cap.	£2.20 Qty
Tags: King KegPin ValveS30 ValveKegging & DispensingSpares
Part of 4 ins Cap with S30 valve 4 ins Cap with Pin valve

General Spares - Floats

General Spares - Spanners

5286 more...	Barrel Spares Barrel Spanner (plastic) Only fits the black King Keg 4 ins caps.	£3.41 Qty
Tags: Kegging & DispensingSparesPET / Plastic

General Spares - Taps

3455 more...	Barrel Spares 3/4 BSP Hop Filter Dome	£0.60 Qty
Tags: 3/4 BSPFilteringKegging & DispensingSpares

4678 more...	Barrel Spares Black lever tap with pipe barb and back nut A general purpose barrel tap complete with washer and back nut. The spout has a hose barb allowing a 1/2 inch internal diameter pipe to be attached if desired.	£4.99 Qty
Tags: King KegPin ValveS30 ValveKegging & DispensingSpares
Part of Fermentation Bin (bucket) with tap & lid Bottom Tap with pin valve Top Tap with pin valve Bottom Tap with S30 valve Top Tap with S30 valve Used with Float set

4420 more...	Barrel Spares Y/L Thread Hop Filter Dome	£0.65 Qty
Tags: FilteringKegging & DispensingSpares

2651 more...	Barrel Spares Back Nut The back nut for both the Black Lever Tap and the Quick Serve Tap.	£0.95 Qty
Tags: Kegging & DispensingSpares
Part of Drum Tap Quick Serve Tap 12 Quick Serve Tap 8

8544 more...	Barrel Spares Quick Serve Tap 12 (without back nut) A general purpose barrel tap with washer. The spout of the tap can rotate independent of the shaft so that it can always face down. Spout Diameter: 12mm	£4.05 Qty
Tags: Kegging & DispensingSpares
Part of 5 gal Barrel with vent cap 2 gal Barrel with vent cap Includes Washer for tap (black)

9191 more...	Barrel Spares Quick Serve Tap 12 A general purpose barrel tap complete with washer and back nut. The spout of the tap can rotate independent of the shaft so that it can always face down. Spout Diameter: 12mm	£4.59 Qty
Tags: Kegging & DispensingSpares
Used with Float set Includes Washer for tap (black) Back Nut

5818 more...	Barrel Spares Washer for tap (black)	£1.00 Qty
Tags: Kegging & DispensingSpares
Part of Drum Tap Quick Serve Tap 12 Quick Serve Tap 12 (without back nut) Quick Serve Tap 8

General Spares - Valves (Pin)

6890 more...	Barrel Spares Pin Valve & Gas Bulb holder the combination of this stainless steel pin valve and gas bulb holder will enable you to use the 8 g CO2 and 8 g N2O Gas Bulbs.	£10.00 Qty
Tags: CO2 Bulb 8 gPin ValveKegging & DispensingSpares
Used with CO2 Sparklet Bulbs 8g (10s) N2O Sparklet Bulbs 8g (10s) Includes Bulb Holder 8 g

1078 more...	Barrel Spares Bulb Holder 8 g Used to inject 8g gas bulbs into S30 pin valves. Simply load gas bulb into holder and screw down on top of valve until gas is discharged.	£3.34 Qty
Tags: CO2 Bulb 8 gPin ValveKegging & DispensingSpares
Part of Pin Valve & Gas Bulb holder

1709 more... Instructions	Barrel Spares Pin Valve Combinded Injection & Pressure Release Valve	£10.92 Qty
Tags: CO2 Bulb 8 gKing KegPin ValveS30 ValveKegging & DispensingSpares
Part of 4 ins Cap with Pin valve 2 ins Cap with pin valve Used with Valve Spanner Bulb Holder 8 g Includes Valve Inlet Rubber Valve Relief Rubber Sealing Washer Valve O Ring

General Spares - Valves (S30)

7144 more... Instructions	Barrel Spares S30 Valve Combinded Injection & Pressure Release Valve	£13.99 Qty
Tags: King KegS30 ValveKegging & DispensingSpares
Part of 4 ins Cap with S30 valve 2 ins Cap with S30 valve Used with Valve Spanner L30 CO2 Cylinder Includes Valve Inlet Rubber Valve Relief Rubber Sealing Washer Valve O Ring

General Spares - Valves (S30/Pin)

5900 more...	Barrel Spares Valve Inlet Rubber	£0.70 Qty
Tags: King KegPin ValveS30 ValveKegging & DispensingSpares
Part of Pin Valve S30 Valve

1673 more...	Barrel Spares Valve Relief Rubber	£0.70 Qty
Tags: King KegPin ValveS30 ValveKegging & DispensingSpares
Part of Pin Valve S30 Valve

5178 more...	Barrel Spares Sealing Washer	£0.97 Qty
Tags: King KegPin ValveS30 ValveKegging & DispensingSpares
Part of Pin Valve S30 Valve

3595 more...	Barrel Spares Valve O Ring	£0.70 Qty
Tags: King KegPin ValveS30 ValveKegging & DispensingSpares
Part of Pin Valve S30 Valve S30 Inlet Valve, Brass

Hambleton Bard Barrel - Spares

1985 more...	Hambleton Bard Inlet Valve Rubber [orange]	Product Currently Unavailable
Part of S30 Inlet Valve, Brass

4229 more...	Hambleton Bard Inlet Valve Washer [white]	£0.37 Qty
Part of S30 Inlet Valve, Brass

3689 more...	Hambleton Bard Safety Valve Rubber [yellow]	£0.37 Qty
Part of Safety Valve

4305 more...	Hambleton Bard Safety Valve 'O' Ring	£0.87 Qty
Part of Safety Valve

Primera - Parts

3646 more...	Primera 2 ins Cap with S30 valve This type of 2 ins cap fits all Primera barrels and includes an 'O' ring. It is used in conjunction with a S30 gas cylinder.	£17.69 Qty
Tags: S30 ValveKegging & Dispensing
Fits 2 gal Barrel with vent cap 5 gal Barrel with vent cap Includes Washer for 2 ins cap S30 Valve

8605 more...	Primera 2 ins Cap with pin valve This type of 2 ins cap fits all Primera barrels and includes an 'O' ring. It is used in conjunction with an 8 g gas bulbs.	£14.62 Qty
Tags: Pin ValveKegging & Dispensing
Fits 2 gal Barrel with vent cap 5 gal Barrel with vent cap Includes Washer for 2 ins cap Pin Valve

1655 more...	Primera 2 ins Cap with vent	£3.02 Qty
Part of 2 gal Barrel with vent cap 5 gal Barrel with vent cap Includes Washer for 2 ins cap Relief Seal for 2 ins Vent Cap

7848 more...	Primera Relief Seal for 2 ins Vent Cap	£0.80 Qty
Tags: Spares
Part of 2 ins Cap with vent

2739 more...	Primera Washer for 2 ins cap	£1.47 Qty
Tags: Pin ValveS30 Valve
Part of 2 ins Cap with S30 valve 2 ins Cap with pin valve 2 ins Cap with vent

Suprimo - Parts

8705 more...	Suprimo Drip Tray	£2.34 Qty
Fits Barrel with pin valve Barrel with S30 valve